P6000- Industrial Grade

.Standard 2.5" SATA III SSD, compatible with SATA III/II/I interface
.Capacity: 64GB ~ 256GB
Performance: Sequential Read/Write up to 550/530MB/s
.Built-in ECC (Error Correction Code) function
.Support TRIM command to ensure optimized performance over the drive's lifespan
.Support S.M.A.R.T. function
.Anti-vibration, high-heat resistance, and shock resistance
.Operating voltage: 5V
.Operating temperature: -40℃ ~ +85℃ (optional)



SSD Compatibility and Perfomance tests:

The tests show that there is no compatiblity issue with SSDs,

and no performance loss when using SSDs with our converters.



.Dimension: 100mm x 70mm x 9mm

.Form Factor: 2.5”

.Interface: SATA III / 6Gbps (back words compatible with SATA 3Gbps, and 1.5Gbps)

.Support Windows 7 Trim command and SMART function

.Capacities: 64GB, 128GB, 256GB

.Performance: Sequential Read/Write up to 550/530MB/s

   *The sequential read and write speed is based on internal testing. Actual transfer speed may vary depending on

    different testing environments.

.Power supply: 5V

.ECC Recovery: Up to 55bits/512Byte sector protection (*varies depending on exact configuration)

. Embedded static wear-leveling technology for better reliability and longer lifespan.

. MTBF: 1,000,000 Hours

. Shock

I.  Operation: 1,500G, duration 0.5ms, half sine wave

II. Vibration: 15G peak, 10~2KHz with 3axis

. Humidity: 0℃~55℃ / 5~95% RH, 10cycles

. Temperature

I.  Standard Op Temp.: 0℃ ~ +70℃

II. Extended Op Temp. : -40℃ ~ +85℃

III.Storage Temp. : -55℃ ~ +95℃

. Low power consumption

. Warranty: Please Check " Pretec's Warranty Policy "

Capacity Part No.
     64GB       SATP6064G-HMM
     128GB      SATP6128G-HMM
     256GB      SATP6256G-HMM

Capacity Part No.
     64GB       SATP6064G-CMM
     128GB      SATP6128G-CMM
     256GB      SATP6256G-CMM