N-SATA

Pretec N-SATA SSD incorporates real RAID function including RAID 0 and RAID 1 configuration. Unlike traditional SSD, Pretec N-SATA can be set as RAID 0 mode in order to have the largest capacity. With RAID 1 function, the N-SATA will have mirroring function like standard RAID disk which can ensure the backup of your valuable data. Pretec N-SATA SSD also comes with a standard 2.5" SATA HDD form-factor to act as a solid state 2.5" SATA HDD.

• Supports 1.5/3.0Gbps SATA I/II interface
• Performance*:
  Series             Sequential Read     Sequential Write
  Pro Series:Up to 260MB/s            Up to 210 MB/s
  Elite Series: Up to 260MB/s           Up to 180 MB/s
• Capacity:
  - Pro Series: 64GB, 128GB
  - Elite Series: 128GB, 256GB, 512GB
• First SATA SSD embedded with RAID 0/1 function and scalable capacity
• Scalable structure to change flash module ( By customers request only)
• High reliability based on the internal BCH 10bit ECC
• Supports SMART (Self-Monitor Analysis and Reporting Technology)
• Supports Wear Leveling
• Supports SLC and MLC NAND Flash
• Data integrity under power-cycling
• Excellent performance and low power consumption
  *The sequential read and write speed is based on evaluation board. Actual speed will be updated in formal datasheet.

• Dimensions : 100mm(L) x 70mm(W) x 9.5mm(H)
• Weight: 91g
• Fully Compliant with Serial ATA International Organization: Serial ATA Revision 2.6
• Fully Compliant with ATA/ATAPI-7 Standard
• Shock:
  - Operating: 1,500G, duration 0.5ms, half sine wave
  - Vibration: 20G peak, 10~2KHz with 3axis
• Humidity: 0°C~55°C / 95% RH, 10cycles
• Temperature:
  - Operating Temperature: 0°C ~ +70°C
  - Storage Temperature: -40°C ~ +85°C
• MTBF (Mean Time Between Failure): more than 2,000,000 power-on hours
• CE and FCC compatibility