.Standard 2.5" SATA III SSD, compatible with SATA III/II/I interface
.Capacity: 64GB ~ 256GB
.Performance: Sequential Read/Write up to 550/530MB/s
.Built-in ECC (Error Correction Code) function
.Support TRIM command to ensure optimized performance over the drive's lifespan
.Support S.M.A.R.T. function
.Anti-vibration, high-heat resistance, and shock resistance
.Operating voltage: 5V
.Operating temperature: -40℃ ~ +85℃ (optional)
SSD Compatibility and Perfomance tests:
The tests show that there is no compatiblity issue with SSDs,
and no performance loss when using SSDs with our converters.
.Dimension: 100mm x 70mm x 7mm
.Form Factor: 2.5”
.Interface: SATA III / 6Gbps (back words compatible with SATA 3Gbps, and 1.5Gbps)
.Support Windows 7 Trim command and SMART function
.Capacities: 60GB~480GB
.Performance: Sequential Read/Write up to 550/530MB/s
*The sequential read and write speed is based on internal testing. Actual transfer speed may vary depending on
different testing environments.
.Power supply: 5V
.ECC Recovery: Up to 55bits/512Byte sector protection (*varies depending on exact configuration)
. Embedded static wear-leveling technology for better reliability and longer lifespan.
. MTBF: 1,000,000 Hours
. Shock
I. Operation: 1,500G, duration 0.5ms, half sine wave
II. Vibration: 15G peak, 10~2KHz with 3axis
. Humidity: 0℃~55℃ / 5~95% RH, 10cycles
. Temperature
I. Standard Op Temp.: 0℃ ~ +70℃
II.Storage Temp. : -55℃ ~ +95℃
. Low power consumption